390-33 Silky Sugoi 330mm Sheath Saw

SUGOI - Extra Large Teeth Professional

330mm (# 390-33)
$182.00
$182.00
Skip to product information
390-33 Silky Sugoi 330mm Sheath Saw
  • 390-33 Silky Sugoi 330mm Sheath Saw
  • Silky Sugoi Sheath Saw
  • 390-33 Silky Sugoi 330mm Sheath Saw
  • Silky Sugoi Sheath Saw
SUGOI - Extra Large Teeth Professional

SUGOI - Extra Large Teeth Professional

$182.00
$182.00
DESCRIPTION

The SILKY SUGOI is a state-of-the-art, must-have professional arborist saw with a razor-sharp and ultra-fast cutting curved blade in either 330mm, 360mm or 420mm lengths. Nicknamed by arborists as the "Tree Tiger" due to its super aggressive tooth pattern and yellow-orange tiger stripes on the rubber handle, each Sugoi has a progressive teeth configuration with smaller teeth at the handle end of the saw to assist in starting the cut quicker, and larger teeth at the end of the blade to provide more aggressive cutting as you progress through your cut.  

The saws also come with a custom high-visibility plastic scabbard that can be attached to the belt or lower leg. And the curve blades cut faster than a straight blade by diving into the wood fibers quicker and more effectively.

*Sugoi - the Japanese meaning of the word Sugoi is "amazing" and "awesome" and is used to express admiration and excitement. 

CLICK HERE to find out how to use your Silky Folding Saw the correct way.
TECHNICAL SPECS
  • Blade Length 330mm, 360mm or 420mm
  • Extra Large Teeth (5.5-6.5 teeth per 30mm/4.7-5.5 teeth per inch)
  • 330mm Weight 580g
  • 360mm Weight 615g
  • 420mm Weight 630g
  • Kerf 1.9mm
  • Non-set tooth design
  • Mirai-Me finish
  • Sharpenable
  • Electroless Nickel Plated Coating on blade
  • GOM Rubber handle
  • Ultra-strong one-piece construction
  • Heavy duty sheath with detachable belt loop holder
  • Exceptional strength and balance
  • Superior quality
  • Made in Japan
  • Limited Lifetime Warranty

    For more information on Silky Saw technology and teeth configurations - click here
MAINTENANCE

Although the blades on these saws are made from the highest quality Japanese steel and are coated with a hard electroless nickel plating (a uniform, hard, corrosion-resistant finish that uses a chemical reaction rather than electricity during manufacturing), they may still be affected by rust and resin if not properly maintained. 

We recommend you clean these blades with warm soapy water and a light brush to remove tree sap and small wood chips after each use. For anything heavier (or if you've let residue build up over time), our Yanipika Sap and Resin cleaner should return your blade to good working order.

After drying your blade thoroughly, we also recommend applying our special purpose Mineral and Camellia Oil for added protection and then store your tool away in a moisture free place.
REPLACEMENT PARTS

There are full replacement parts available. Click the spare part link below to be taken to the relevant product option.

Sugoi replacement belt clips

Sugoi replacement handles

Sugoi replacement screw sets

Sugoi replacement sheaths

Sugoi replacement blades

You may also like